Skip to content
DocumentationSetupVPN

TP-Link

Configure your router to use WonderProxy's VPN

TP-Link Router Configuration

For this example we are using the TP-Link AX5400 model router. Please consult TP-Link's website to determine which models supports the "VPN Client" feature.

TP-Link Routers can connect to a single VPN at a time, and can assign an arbitrary number of clients to that VPN. Clients not assigned to the VPN use the network connection normally.

Configure VPN on Router

  1. Log into your router
  2. Select the Advanced tab
  3. Select VPN Client from the left sidebar
  4. You may need select Enable beside VPN Client
  5. Under Server List click on Add
  6. Enter your server description, consider "WonderProxy - <location>"
  7. Select VPN Type L2TP/IPSEC
  8. Enter your username, and WonderProxy Password (note: TP-Link is enforcing a 64 character maximum password length, so your proxy token can not be used)
  9. Enter the IPSec Pre-Shared Key: (you must be logged in as a proxy user to view the shared secret)
  10. Screenshot of TP-Link VPN configuration modal
  11. Click Save
  12. Select the toggle to enable the VPN

Note: If your router doesn't connect please ensure you have up-to-date firmware.

Add Devices to VPN List

TP-Link routers allow you to have some devices use the VPN while others do not. Add devices you wish to use the VPN to this list.

  1. Under Device List select Add
  2. Select the checkbox beside devices you wish to use the VPN connection
  3. Screenshot of TP-Link add device modal
  4. Select OK